Showing posts with label knitting. Show all posts
Showing posts with label knitting. Show all posts

Saturday, October 17, 2026

Finished knitting project -- Miami Vice Shawl


Here is a pic of the completed Miami Vice Shawl, stretched out on a towel to dry.  It opened up nicely and is sufficiently large.  Yes, it's a terrible photo -- the shawl lying in a sunbeam, no details clearly visible.  Maybe I'll take a better photo at some point and add it to this or a future post.

For the cast-off, I ended up doing a few rows of garter stitch and then a crocheted cast-off (single crochet in 3 st, chain 7).  It took a few tries to find a cast-off I liked, which means I dropped a stitch, oops, and had to fix it with one of the yarn ends.

The pattern has no errors, I don't think.  It was straightforward and clearly written.  I don't think I'd make it again, but it kept me reasonably well entertained for almost exactly a year of knitting.  I cast off roughly a year to the day of when I unraveled the project the yarn used to be and cast on for this one.

The shawl probably took about 900 yards of yarn.  The rest of the yarn is now in with the other sock yarn oddballs.

The dye ran/bled a little bit while it was soaking before getting blocked.  That is not atypical for Christy's yarn, and not atypical for pink dyes.

I'm glad this is done.  But now I need a new travel project. 



Saturday, October 10, 2026

Finally, some socks!


Finally, I have knit some socks!  It's been quite a while since I've knit any.  These are knit with very thick yarn so they went quickly.  They're for a friend who wanted house socks, the kind that are closer to slippers, and indeed, the friend might eventually add felt soles of some sort to the bottoms.

I used my usual generic sock recipe.  I've knit enough socks that I don't really need an explicit pattern.

The yarn is Brown Sheep Lamb's Pride worsted weight, which is a single ply wool/mohair blend.  I've always liked it a lot.  Heck, some of my first socks were made from Lamb's Pride and they're still going strong.  For these socks, I used it 2-stranded.  And for whatever reason, was able to get a gauge of 4 stitches per inch.  Hopefully that will help with durability.

Maybe I'll knit more socks.  I probably don't have enough of this exact yarn combo for another pair of 2-stranded socks, but I do have skeins in other colors.

In other progress, I am almost done with my Miami Vice shawl.  I've finished all the pattern sections.  So now, I either do the bind-off, or I improvise and add more to the shawl.  I have probably about a quarter to a third of the second skein left, so enough for some improv.  But I'm very tired of this project and want to get it finished.  So chances are I'll follow the pattern, finish it up, and toss the remaining yarn in the sock oddball stash.  Someday I'll have fun with combining sock yarn oddballs into colorful socks or other projects.  I hope I'll like the shawl after I've blocked it.

After it's done, I'll have zero knitting projects except for the current charity hat.  No doilies, no sweaters, no shawls, no socks, no travel projects.  I'd better get dithering!  I need some projects ASAP!

I'm pretty sure my manufacturing-defect Nagy saxony wheel will go to its new home this month.  I hope the new owner is able to tweak her a bit more so that she becomes a more delightful spinning companion.

I also want to do some spinning (on a spinning wheel) if I get a chance in the next few weeks, just because.

In addition, I want to play around a bit more with support spindles.  I watched a bunch of videos of ethnic spinning, i.e., people in other countries who still use spindles for spinning the way their own grannies taught them.  I picked up some ideas I want to play around with to make my support-spindle spinning a bit more consistent.

Today I went to a handweavers guild sale.  I was hoping to get a belt shuttle or other small weaving tools, but those were fairly picked over by the time I got there.  I did buy a few books.  And, well, some yarn followed me home.  Most of it is fairly thick.  All wool, I think.  Mostly not at all soft.  Dunno if it's rug wool or if it would also be good for bags or knitted outerwear.  Dunno if I'll knit with it or weave some yardage for rugs and bags, or do some narrow-band weaving or other crafts.  I seemed to be in an autumn-y mood -- lots of grays and browns and autumn colors.


Sunday, September 20, 2026

Next Sweater dithering (and a few other boring progress reports)



The just-finished Appledore Gansey sweater, with a quick/basic blocking, on the recipient, over the layers already being worn.  Yay, it fits!  It is still a little too loose in the shoulders and upper arms for my liking, though I didn't really adjust the sweater before snapping a pic.  I think much of that is a style and body type thing -- it probably would have been more flattering on someone with wider shoulders and/or a burlier upper body.  But it's done and in the possession of the Intended Recipient, who is very pleased with it.  The recipient often wears multiple layers, especially in winter, so oversized enough so that lower layers don't bunch up is not a bad thing.

The handspun worked very well for the sweater.

Now on to the next thing(s).

I'm almost done with the latest charity hat, so I'll get that finished up and start the next one.

I'm doing some quick gift socks for a friend.  I'm using two strands of Brown Sheep Lamb's Pride (worsted weight, 80% wool 20% mohair, single ply) from the stash.  I felt like doing top-down generic socks, so I'll have to get my actual gauge after a few inches of knitting.  I'm starting with 32 stitches but might need to go down to 28 or even up to 36.  But I think this will be OK.  The friend wants these to be slipper socks that will felt a bit especially while being worn, so a little big isn't a problem, not to mention that one needs a bit more ease for fat yarn.

I'm not completely sure how much yarn these will take, given my friend's foot measurements.  Eh, maybe I'll just keep on knitting socks (for various people) once this pair is done, until the skeins I'm using are done.  I have 2 skeins of dark teal green and 4 skeins of dark aqua/turquoise in a shade that is very similar to the green.  I'm using one strand of green and one of blue, held together, mostly so that the socks will be quick to knit and very warm, but also since a single ply tends not to be as durable as a multi-ply, and 2 strands of single ply yarn will hopefully be more durable than one.

I ended up with someone else's remnant Brown Sheep Lamb's Pride stash, all seconds, mostly 2-3 but sometimes 4 skeins per color.  The thing about seconds is that sometimes the yardage is short, or there are lots of knots, or there are funky bits in the skeins.  I've slowly been going through it.  I'm looking at some of what's left and seeing three skeins of a light brown, three skeins of a heathered gray, and two skeins of black, all of which kind of go together.  So...  that's enough for a sweater, if I can figure out what I want to make.  I also have oddments from old projects over the years in a variety of colors that could be added.

Stripes.  Those are easy.  But.  I usually look pretty terrible in horizontal stripes.  Also, there would be ends.  So many ends.  I could do helical/narrow stripes, maybe, though there might be some weirdness where the sleeves join the body if I don't calculate it exactly right.

Color patterns.  A lot of fun.  But, things like Lopi-style yoke-patterning usually require a main color of about 800 yards, and I have a bit less than 600 yards.  But not impossible.  Fair-isle is another possibility, especially if it's enlivened with leftovers in contrasting colors.  Faroese style color patterns could be interesting -- alternating gray and brown stripes with simple black color patterns on each.  But then we get back to stripes, lots of ends, unattractive, etc.
 
There are some ideas in Knitting in the Nordic Tradition by Vibeke Lind -- not only a few sweaters with Faroese and other small motifs, but also her vertically-knit striped smocks, which would be straightforward but would require seaming.

I don't do steeks, by the way, so patterns get adapted around that.  I don't fear cutting the yarn. I fear wanting to unravel a disappointing project to reuse the yarn and having zillions of cut ends that aren't easily reusable.  And maybe that too is part of why I don't want to knit stripes.  Though usually I carry the yarn ends up inside the sweater and only cut them and sew them in when the sweater is finished and I'm content with the results.  In my experience, sewing in the ends carefully makes the smoothest-looking stripes in circular knitting.  Nothing else I've tried has been as unobtrusive.  Though honestly I'm fine with jogs and not worrying about it.

Hmm, EZ's bog jacket is a possibility, too.  I've made a baby bog but not an adult bog.  That too requires seaming.  The stretch of kitchener stitch is long enough that it also counts as seaming, at least in my opinion.  A ribwarmer, maybe, since 600-ish yards (i.e. 3 skeins) might be just about enough to make with one of the three-skein colors?  I've already knit a 3-skein vest from the Lamb's Pride Seconds stash, so if the yarn usage is comparable, then it'll work.  EZ also has a few vertically-knit panel sweaters, similar to ones in Lind's book but usually mostly done in garter.  In general, EZ has seaming in her garter stitch sweaters.  Though, sigh, I can seam stuff even if it's not my favorite thing to do.

There are Yet Other possibilities out there, from my various pattern collections, Ravelry, etc.

Or I could throw this pile of yarn back in the stash.  Or make things that aren't sweaters.

I do want to make another sweater, though, now that the Appledore-ish gansey is done.  Colors, cables, gansey, something plain, interesting construction, real pattern, vague template, etc., so many options.  Ditto for yarn choices.  I've been conscientious about acquiring sweater quantities of yarn for a while, and there are plenty of good choices available in my stash, both handspun and commercial yarns.  I still have lots of oddballs and odd quantities, too.

Now that everyone is all bored, I'll go back to the hat and socks and continue dithering about the next sweater-equivalent project.

Tuesday, September 15, 2026

A finished item -- my handspun Appledore (ish) gansey (ish)

Almost a year to the date from when I finally cast on, with this yarn and this number of stitches etc., my Appledore Gansey is finished!

I still need to tuck in the ends and block it, but I am excited that it's done and want to write about it now instead of later.  I know I've written about it before and thus this might be repetitive, but too bad!  It's my blog and I'll bore if I want to.



This started with me being intrigued by the Appledore Gansey in Rae Compton's Complete Book of Traditional Guernsey and Jersey Knitting.  I liked the plainness of the gansey, livened by a bit of decoration on the shoulder straps.

The traditional Appledore gansey is a plain gansey with all the trimmings -- a side seam in purl, underarm gussets, one-piece knitting of a drop-shoulder design with the sleeves picked up and knit down after the shoulders were joined, and shoulder straps.  I'm not 100% sure what the traditional range of patterns for the shoulder straps would encompass.  Betty Martin (often rig and furrow strips then betty martin strips, alternating) and seed stitch are what I see in modern patterns and most old photos.  A lot of old photos are fairly indistinct so aren't too discernable in the books and websites I have available to me, so I don't really know what other shoulder strap patterns were used by the Appledore knitters.

There's also a photo on page 2 of Beth Brown-Reisel's Knitting Ganseys that shows a plain gansey with only rig-and-furrow on the shoulder straps.  The photo is from the Sutcliffe Studio, and I have no idea if those ganseys were a specialty of anywhere in particular.  Google searching for the photos has not yet led me to any more info, alas, though I suppose I could email BB-R and ask her.

I wanted to use stash yarn for my version, and in particular, handspun.  This meant that I needed to reconfigure the pattern for my new gauge.  Also, my handspun is not uber-smooth like traditional gansey yarn, so knit-purl patterns aren't necessary going to show to good advantage, especially with the not-so-fine gauge.

So, it's gansey-ish rather than a classic gansey made with the traditional fine machine-spun yarn.  And it's Appledore-ish since the shoulder strap pattern is rig-and-furrow rather than a documented knit/purl design like betty martin or seed stitch.

For those who care, Rig and Furrow is a name for stockinette and reverse stockinette stripes.  Purl-knit-knit-purl for a 4-row pattern repeat, though one can adapt for all kinds of variations.  Seed Stitch is alternating knit-purl on one row with purl-knit on the next.  Betty Martin is 2 rows of k2p2 followed by 2 rows of stockinette, with the k2p2 blocks usually but not always aligning with each other.

My first attempt was several years ago.  I got to the point where back and front would split and decided I didn't like it.  I had put in a reverse-stockinette horizontal ridge just about the ribbing and decided it looked really stupid.  Plus the yarn was pink and, well, it was a bit TOO pink for my current tastes.  So I took it apart and returned the yarn to my stash.

My second attempt was sometime in 2025.  I tried a different batch of handspun.  After a few inches, I decided it wasn't quite right and unraveled that, too.

My third attempt began last September, with a batch of dark forest green handspun that was roughly Aran weight.  I don't have a great photo of the yarn, alas, or I'd inflict it on y'all.  Maybe later.

A family member wandered by during my planning and swatching and expressed interest in receiving a handknit sweater, so I declared them the Intended Recipient and took their measurements.

Rae Compton and Beth Brown-Reisel and Gladys Thompson (Guernsey and Jersey Patterns) all have extended discussions on gansey construction and patterning.  BB-R also has percentage charts for adapting the gansey idea to one's own gauge and measurements.  Elizabeth Zimmermann's percentage system and the templates with percentages in Priscilla Gibson-Roberts' Knitting in the Old Way also helped me figure things out.

There are some great online resources, too.  I don't remember all of them, but I'll call out Gansey Nation (http://www.ganseys.com/) and the info and links from the Museum of Barnstaple and North Devon (https://barnstaplemuseum.org.uk/ourstories/dressed-for-chill-the-appledore-gansey/) and also photos and write-ups of Josephine Sim's pattern from the booklet by John Whitlock and her, even though I don't own it (yet), Prangs, Tacks and Frocks, which can be found scattered throughout the internet.  Places like Propagansey and other specialty websites, various other museum sites, and the Ravelry gansey forum (Guernseys, Ganseys, Knit-Frocks - Fishermans' Sweaters) were also helpful and inspiring.

Armed with schematics, percentages, and technique tips, and a probably-lying gauge swatch, I cast on.  Then measured my real gauge, unraveled, re-calculated the numbers, and cast on again.

It went well.  Knit knit knit.  Then I had to make some decisions and put the knitting down.  It sat for several months.  Well, who needs a warm sweater when it's summer?

A few weeks ago, we got our first taste of autumn.  I was inspired to pick up the knitting again.  My subconscious had made all the decisions I had dithered about earlier.  And I knit knit knit until it was done.  YAY!!!!!

It fits the intended recipient.

It's a little big in the upper arm area.  It might be better for someone with burlier shoulders.  But also, when I came back to it this month, I ended up making the above-underarm area a bit deeper than I had initially planned.  I had started the underarm gussets a bit early so the sweater was a bit too short for the intended recipient's preferences, and thus I added more above the underarms to get to the total desired length.  I didn't feel like ripping it all the way back to the start of the gussets.

But other than that, I'm very pleased with it.

The neck opening before the final ribbing was also kind of enormous, since I added more length to the upper body after I'd started the front neck shaping.  But amazingly and wonderfully, the ribbing took care of that.  I reduced a lot of stitches after picking up for the collar/edge and it didn't pucker or gap or anything, yay.

Dunno if I could have or should have done something similar for the upper sleeves.  I'll consider that for next time, though.

Something interesting I noticed:  Usually, there's a small gap between the body and sleeves when everything is joined up or picked up and knit down or whatever.  I use the yarn tails to close up holes.  With the underarm gussets, there was no gap at all, no loose spots or holes or anything.

I used almost exactly 900 yards and still have 350-ish yards of the yarn left.  That'll return to my stash for some future project.

Hmm, what sweater do I want to make next?  And who shall it be for?

For ganseys, I like the very common seeds-and-bars design, so that's a possibility.  But maybe I'll do something with cables.  Or an Elizabeth Zimmermann design.  Or something else entirely, of course.  I haven't done a Lopi sweater in a while, for example, and someone is willing to buy the yarn if they get the sweater.

I'm close to done with my traveling shawl project, too.  Soon I'll have to come up with a new travel project.

Other than that, I'm doing charity hats and will probably knit some house socks for a friend.  I need to go through my stash to see what I have that would be suitable for thick-and-quick socks.  The friend wants the socks to felt a bit with wear, so that will also be taken into consideration.

I should do some spinning.  And do a write-up on another of my rescued spinning wheels.

The friend who took some of my handspun to try weaving with has made a truly amazing and gorgeous wrap.  That too will be in a future post.


Monday, March 30, 2026

Time for another progress report!

 I haven't posted since last month, yikes!

Knitting and what-not is still happening, though I've been very busy with things unrelated to having fun with fiber.

I haven't started any new doilies yet.

My travel shawl is still growing.  I'm on the second (and final) ball of yarn.


I'm not sure how much of it will get used as I finish up the actual pattern.  Then, once the pattern (as written) is finished, and if there is yarn left, I'll need to decide what to do.

I could grow the pattern a bit more -- add another band or two in the same style.

I could add a sideways-knit lace border.

Or, if there's enough yarn left, call it good, and then make a pair of socks or fingerless mitts.

I have no idea how large the shawl will be once it's blocked.  It's kind of a weird little shoulder-sized poncho thing at the moment.

----------------------------

My sweater has had close to zero progress since the last time I wrote about it.  Hopefully I'll return to it soon since I'd like to get it done.

No pics, because what's the point?

-----------------------------

I have started a new project, though!  It's a crocheted baby blanket.  A friend of mine ended up with a stash of acrylic baby yarn, and asked all of us if we'd like to take some yarn to make baby blankets.  The blankets are destined for a local shelter that serves women with children.


I'm holding two yarns together.  One is something like Woolease, mostly acrylic with a bit of wool, in white with a bit of mylar.  I can't resist the sparkles.  The other is some skinny boucle-ish thing in shades of green and yellow.

I'm doing a very simple pattern.  Chain a likely number of stitches.  Then, all rows are dc, ch1, with the dc going into the space of the ch1 of the previous row.  Once the blanket is roughly square, I'll probably do a round or two of dc for the edging, estimating how many dcs will be needed so that nothing ruffles or binds, and then maybe a round of crab stitch to finish off.  If I'm feeling it, I'll switch to a different yarn for the edging -- that same boucle yarn but in yellow rather than green-and-yellow.

---------------------------------

I went to the first local fiber fair of the season this month.  I hadn't intended to buy anything, but, well, 4 ounces of a pretty gray Romeldale roving followed me home.  It's a blend from several different sheep, white and dark, which overall reads as a medium gray.

I guess I'll need to drag out a spinning wheel and do some spinning in order to keep my fiber stash at steady state or better!

---------------------------

So there's my relatively meager progress report for the past month or so.


Wednesday, February 11, 2026

Lavori 07/15

 Lavori 07/15 is finished!


This is an 80 round doily (plus crochet cast-off), 8 pattern repeats per round (and 16 PR/rnd in the outer rounds).  The chart is NOT error free.

Chart Errors:

Round 51:  Towards the end of the repeat, there is a | symbol that should be a double-decrease instead.  It's fairly obvious.

Rounds 57-59 end up having an issue, but it's easily fixed.  Instead of what's charted, do the following:

Round 57: (yo, k1b, yo, k3) all the way across.  (This is how it's charted, but the chart omits one repeat, which ends up affecting how to chart round 59)

Round 59: (sk2p, yo) all the way across  (you could do yo, sk2p instead of sk2p, yo, though that'll affect the next error fix)

And somewhere before round 65:  K 6 more stitches at the end of the round before beginning the next round, so that the first stitch of round 65 is directly over the sk2p of round 59.


This was a reasonably fun doily to knit, though it had way more stitches than seemed necessary by the end.  Perhaps it would have been better doing this with either 6 or 7 pattern repeats per round instead of 8.  Dunno if that would have worked well enough, though, since the number of stitches in the early rounds is just about right.  It's the later rounds where things go wild.

I think it is probably a Herbert Niebling pattern, and if not, then it's a design by someone who used motifs that are characteristically Niebling-esque.  Whatever.  It's a cute doily no matter who the designer was.

The thread was from the thrift store vintage stash.  It was 300 yards of something that seemed like it was roughly #30 in weight.  I ran out in the middle of round 79.  Luckily, the leftovers stash yielded some DMC Cebelia that was sufficiently similar, whew.

Hmm, what doily shall I tackle next?  There are a few more small doilies in Lavori 7 that could be quick to knock out.  There's the old French language non-charted text-only doily I've mentioned before, clearly a Niebling design, that could be interesting to puzzle out.  I could pick another big pattern, or do some designs by Erich Engeln or Christine Duchrow or Marianne Kinzel or one of the other greats.  I guess I'll see what appeals, and also what thread I feel like using.

Other than finishing Lavori 07/15, I've been slowly working on my Miami Vice shawl and my Appledore gansey.  There's not enough progress to be worth sharing.  I've mostly been busy with other things.


Monday, January 5, 2026

A new year, a new doily (and a new post!)




This is another doily in Lavori 7.  This one is Figure 15 Sottovaso.  It has 80 rounds and, as you can see, 8 pattern repeats per round with 16 pattern repeats per round in the outer part of the doily.

It is very silly looking.  So I decided I wanted to make it.

It might be a Niebling pattern, given those outer sets of fans, and also given the silly stuff that happens early on in the doily.

The early doily has several rounds of twisted stitches, which isn't all that unusual, I suppose.  I twisted them in the intermediate rounds since it helps define the columns so well.  And then the columns of twisted stitches turn into columns of crossed stitches.  That (complicated stuff early in the doily, including crossed stitches) is more commonly found in Niebling designs than in patterns known to be created by other designers.  So maybe.

The outer sets of fans are the thing where two or three fan motifs are next to each other with a double yarnover between the fans, as I did in the Lavori 07/30 doily and many others.  As far as I can tell (i.e., from a quick glance), there are no rounds that begin and end with yarnovers.

I rummaged through my collection of vintage threads and found something that might be #30, and, if it's a full rather than a partial ball of thread, might have about 300 yards.  If that's not enough, I found another partial ball (I am nearly 100% sure that's it's partial) of similar-weight thread in a color that's not too different.  I don't care if the outer rounds are slightly different in color from the earlier rounds.

Yesterday was the cast-on day.  Fun fun!

As often happens, I get tired of dpns somewhere in the early slog and try to move to a circular needle a little bit too soon.  So the next few rounds were a bit annoying, as I used variations on the two-circulars and the magic-loop methods until I had enough stitches, and more importantly, enough diameter, to fit on my circular with no more fuss.

I don't always end up doing that, but really, I should know better.  But the dpns kept trying to slither out of the knitted stitches, and it was annoying doing crossed stitches and horizontal-running-thread increases and I wanted to be done with the dpns.

I don't have high hopes for this doily given it's less than well defined motifs in the pic above, but we'll see.  Once I get past the section with so many crossed stitches, the rest seems relatively straightforward and hopefully a bit quicker to knit.

Then I can ruminate on what doily project I might feel like tackling next.

My sweater is growing again -- I'm knitting the back above the armhole.  I'm still vaguely dithering about whether I want to put a couple of short rows in there somewhere.  Quite possibly.  Then I can do the front, and I'll probably do a dropped area in the middle to shape the neck area.  Then the shoulder straps!  Those will require a bit more dithering, too.  I also have to decide how many inches to knit for the front and back before the shoulder straps so that the sweater will fit well and so that the sleeves will have a reasonable number of stitches.

My travel shawl is continuing to grow, too.  Soon I'll be done with the current set of eyelets.  Then it'll be time for another round of increases.  I'm getting close to the end of the first skein of yarn.  It's a bit soon, but I'm already thinking a bit about ways to make the shawl bigger if I still have a lot of yarn left after the official pattern reaches its end.

And that's it for this post!


Sunday, December 28, 2025

Possibly the final post for 2025

I think this is post number 50 for the year, which of course means number 50 since I returned to posting on this blog after the decade-long hiatus.

Here's another pic of my recently finished doily.  A place I was visiting had round tables so I draped it over to show off what it looks like when it's actually on a table.  The table would have needed to have been a little bit bigger to display it to perfection, but eh, that's OK.



I finished another charity hat.  This one is black, same pattern and needle size and everything else as I normally do.


This might be my last charity hat for a while until I can acquire more free yarn.  I have partial balls left but not enough to make a full hat with.  Maybe I'll use two strands and fewer stitches and crank out a few more.  We'll see.

Other than that, I've been working on my travel shawl when I'm traveling or at meetings or otherwise need to keep my hands busy.  I've also started to make some progress again on the Appledore gansey now that Lavori 07/30 is finished.  I'd like to get it done this winter so the recipient can get some use out of it while it's cold.  I won't include photos since they look a lot like last month's photos.  I really concentrated on finishing the doily these past few months, to the detriment of everything else.

Since this is quite likely to be the last post of 2025, why not do a bit of rambling about the past year, at least for those things that this blog is occupied with?

I acquired another rescue wheel this year, which came with a rescue rigid heddle loom.  So I did my first-ever rigid heddle weaving project.  The wheel is fixed up and spinning, too -- it's a very nice vintage wheel, very basic and plain but quite serviceable and steady.

I've done other spinning this year, too.  And I've also been knitting with handspun.  The fiber stash is roughly steady-state thanks to a bit of stash acquisition that happened at fiber fairs and elsewhere.  The fiber fairs are always a lot of fun and I like supporting local people, so no regrets even though I don't really need more fiber until after I've spun up some of what I got during my post-COVID restocking spree.

I learned how to do sprang and also explored several new-to-me tablet weaving techniques and braiding techniques.  Those are beyond the scope of this blog, though.

I did some knitting, too.  Duh.  Cat beds, travel shawls, hats, and, of course, doilies.  It was a productive year for doilies, ranging from small and quick to large and more time-consuming.  Hopefully I'll continue to knit doilies next year.  I want to knit some fingerless mitts for a friend so those are on my to-do list for "soon", and I want to finish the sweater I'm knitting so I can knit more.  I might want to knit another cat bed, too.

I ended up not knitting any socks this year.  Sigh.  I really do need to cast on another pair, but keep not doing it.  I like knitting socks but I keep choosing other things when it's time to start a new project.

The people I hang out with for knitting are a delight, as always, and it will bring me great joy to continue hanging out with them.  I still want to get involved with some of the local guilds, though in general, I'm not really a guilds type of person, so who knows?

What do I want to do next year?  The usual.  More doilies, more shawls, more hats, more mittens (and fingerless mitts), more socks, more sweaters, maybe another cat bed, plus anything else that strikes my fancy.  See?  The usual.

For spinning -- continue spinning, and continue using my handspun.  I think that some of my handspun would work very well for weaving if I feel like rigging up a loom.  What would I use the cloth for, though?  All I can think of is stuff like blankets.  I have no real interest in table runners or towels or placemats, nor do I need any woven scarves.  I don't want to make clothes from my handspun, I don't think.  Rugs could be fun but I'd probably need a sturdier loom than the little plastic vintage or really any kind of rigid heddle loom.  Hmm.

I'll try not to buy any spinning wheels this year, though no promises should something come my way.  I'd like to sell some of my rescued wheels that I don't use very often -- they deserve to be in the hands of people who will use them more regularly.

Maybe this will be the year I start dyeing again.  We'll see!  And hopefully I'll continue posting on this blog.

-------------------------------

Apparently Barbara Walker passed away about a week ago.  She was 95, so had a good long life, well lived.  She was one of the big names in knitting in the 1970s and 1980s, as women turned their intellectual abilities towards knitting and other similar crafts.  There's a lot to be said about so-called women's work, the feminism of the era, and the way that women who'd been restricted to women's work began to focus on and respect the worth of that work.  It's part of the whole ferment of that era -- feminism, civil rights, curiosity about other cultures, reclaiming old-fashioned skills that had fallen out of favor with mid-20th century modernizing, and everything else.

Barbara Walker is known for her collections of stitch patterns and also for her work on generating top-down templates for knitting various kinds of garments.  Her work in combination with Elizabeth Zimmermann's work were entirely liberating for me and many others.  I couldn't really follow most published patterns since I didn't fit the size range the patterns were in, and I couldn't get help from the store owners because I knit "funny" (i.e. continental style at a time when everyone around me did Anglo-American), and because I didn't like sewing pieces together.  I went looking for a book on how to design your own things, discovered Zimmermann and Walker, and never looked back.

The work of these new voices, along with the then-new interest in historic and ethnic knitting, helped to revitalize knitting in the 1970s to 1980s.  This is part of why knitting was such a big part of the early internet years.  Or pre-internet, depending on what you call things like bbs and delphi forums and early newsgroups and the like.  A lot of STEM majors in the university system were knitters, and of course they took those interests with them as the interconnectivity of the early internet started to develop and evolve.  Everything is of course related to everything, but modern knitting very much is a direct descendent of those knitting STEM majors and other knitting artists who were influenced by people like Walker.

Barbara Walker was also into feminist-focused mythology and tarot and other fun topics in feminism and spirituality, and apparently was active in modern dance.  She had a major impact in several fields.  I won't say it's a huge loss to the community -- she'd slowed down a lot in recent years, and she made her enormous contributions to each field decades ago and then moved on to yet other subjects -- but it's still a huge loss to all who knew and loved her, and she deserves a great deal of honor and respect for her many accomplishments over her very long life.  Everything she published about knitting is just as relevant today as it was when she wrote it.


Saturday, December 20, 2025

Lavori 07/30, a few bad pics and a full list of known chart issues/errors/typos

 DONE!!!!!  It's gorgeous, of course.  And it feels really good to know that this project is complete.


I took the above photo while standing up next to it, thus the foreshortening.  It really is circular.

It's about 5' in diameter, give or take a bit, and I used somewhat more than 1500 yards of this vintage #30 cotton thread.

I had no trouble getting it to block flat.


It was a lot of fun to knit -- relatively straightforward with an interesting development of the various motifs, and the intellectual challenge of identifying and fixing chart errors.

It was not easy to find a place big enough to block it that would also be safe from the cats.  If I do another large (or larger) doily, I'll need to think about blocking earlier in the process.

Since I always like to list this info:  there are 202 rounds plus the crochet cast-off, and 6 pattern repeats per round (12 pattern repeats per round starting in round 171).  The chart is NOT error-free.

As promised, here's my comprehensive list of chart errors, along with a couple of other things to note.

Lavori 07/30 Chart Errors, Quirks, Typos, etc.

The chart numbering jumps from round 191 to round 201.  There is no reason for this.  So, although the chart itself goes to round 210 (as charted), it's really only a 202-round doily (as counted).

There's an error at roughly round 165 that affects everything in the hex mesh area all the way through roughly round 191.  I'll discuss that below.

Round 55 -- missing V early in the pattern repeat (it's fairly obvious -- there are a lot of V-1-V maneuvers and one of the Vs is missing)

Round 93 -- missing 1 in the stem area in the middle of the pattern repeat (it's fairly obvious -- it should be O-1-O-1-O, but the second 1 is missing)

Round 97 -- there is an asymmetry on the outer sides of the 5-X-5 leaves.  On the right side, there's a single yarnover.  On the left, a double yarnover.  The single yarnover is the correct version.  Again, fairly obvious when you get there.

Round 105 -- missing yarnover at the very beginning of the pattern repeat, another fairly obvious error.

Round 113 --  another fairly obvious missing yarnover, just to the right of the flower.  There should be seven sets of double-yarnovers on each side of the flower.  Also, the flower really is slightly asymmetric here; each knit turns into a (yo, k1) to go from 13 to 26 stitches with no extra yarnover at the end, i.e., no chart error in this section of the pattern repeat.

Round 121 -- a missing yarnover in the middle of the hex mesh section to the left of the flower (i.e., there should be a double yarnover there, not a single yarnover), fairly obvious like most of the chart errors so far.

Round 123 --  a missing yarnover directly above the missing yarnover of round 121.

Round 127 --  a missing yarnover between the left side of the flower and the hex mesh section.  It should be (yo, sk2p) after all of the crossed stitches.  This took me a few minutes to figure out -- sure, there's an asymmetry, but I needed to count the stitches in the next round to decide whether I had a missing yarnover on the left or an extra yarnover on the right.  The next round requires two stitches at that spot, so a missing yarnover it is!

Round 135 --  2 errors in this row!  There's an extra yarnover to the left of the crossed-stitch section (the right side of the crossed-stitch section has the correct single yarnover), and also an extra yarnover in the center section of the leaves (there should be no double yarnovers in the leaf motif area, just single yarnovers)

Round 141 --  Missing yarnover at the very beginning of the pattern repeat.

Round 153 -- Missing yarnover at the very beginning of the pattern repeat.

Round 159 --  After the first set of leaves (and the skp, k3, k2t that finishes it off), the stitches at the beginning of the stretch of hex mesh are charted as yo, skp, k2t.  This should be symmetric with all the others, and the skp should be a double-decrease (sk2p, left-leaning to preserve symmetry).

Round 163 -- In the first set of leaves, the last leaf has a missing yarnover.  It should be (k4, yo, k-tbl, yo, k4) like all the other leaves in this round.

Round 165 through Round 191 or so -- see discussion, but the hex-mesh motif area has a serious chart error that affects this section of the chart from round 165 through 191 or so.  There are several possible fixes -- my approach is in the below discussion.

Round 169 -- There should be a 1Mv at the beginning of the round.  (In other words, the last stitch of round 167 doesn't get knit in round 168, but rather, moves to the beginning of round 169)

Round 173 -- there's a yarnover on one side of the hex mesh but not the other.  Whether it's an extra yarnover or a missing yarnover will depend on how one chooses to re-chart the hex mesh section of the pattern.  (For my choice to follow the chart as written as much as possible, it's a missing yarnover that needs to be added after the leaf tip at the beginning of the pattern repeat)

Round 175 -- For the second decreasing leaf motif (the one before the outer fans), there is an extra yarnover that shouldn't be there.  The leaf motif should be (skp, k7, k2t) and NOT (skp, k7, yo, k2t).

Round 177 -- Same as 175.  That second leaf should be (skp, k5, k2t) like the other leaves.

Round 179 --  Two chart errors in this round!  The first is the same as 175 and 177.    That second leaf should be (skp, k3, k2t) like the other leaves.  Also, the final growing leaf is missing a yarnover.  It should be (k2, yo, k-tbl, yo, k2) like the others in the round.

Round 201 (which should be labeled as round 193) -- First, note that the round numbering has jumped, with the previous round being labeled as 191.  There's no design-related reason for this; it just is.  Second, there is a missing yarnover at the end of the pattern repeat.

And I think that's it for the chart errors/typos I noticed!  There may well be a few I missed.  The pattern is mostly very logical and symmetric so it can be hard to notice one little missing or extra symbol in an area where it's obvious what one is supposed to be doing.

I also noted that there is some asymmetry where the middle leaf tip transitions into the flower stem.  It didn't mess up anything, so I just left it alone while remarking on it as one of the few places in the doily where things don't seem to be perfectly regular and symmetric.

Discussion of round 165 to 191 in the hex mesh area of the chart

In round 165, the hex mesh areas are different from each other.  One of them fits in with the stitch counts, but won't line up with round 171, when the chart officially goes to 12 pattern repeats per round.  The other lines up with round 171, but doesn't fit in with the stitch counts.

The problem has to do with how the hex mesh motifs line up from round to round.  The ones in the 6 PR/round chart area don't align properly with the ones in the 12 PR/round chart area.

So, some recharting is necessary in this part of the chart until it can gracefully rejoin the actual printed chart.

To summarize what I did, I added an extra chart motif (i.e. like the area with the correct number of motifs for the existing stitch count), and then continued with that extra motif all the way to round 181.  For rounds 183 to 191, I kludged a bit to keep the area looking pretty reasonable while trying to converge with the published chart.  After round 191, I could resume working the pattern as charted.


The above is the chart I eventually ended up using for the hex-mesh area (starting at round 171, in the 12 PR/round part of the chart).  It's not the only possible approach!

In the above chart, the rounds with stars to the left of the round number are where leaf tips join the hex mesh area.  Also, I used a basic symbol for the double decrease on the chart but did directional double decreases as I knit.  Also also, I didn't mark where the hex mesh area starts or ends compared to the beginning/end of the round since it's only important for the first/last pattern repeat, and I didn't mark anything where a double yarnover crosses the beginning/end of round nor where the last stitch of a previous pattern round gets incorporated into the first stitch of the next pattern round.  This chart was for my own personal use and I adjusted automatically without needing to explicitly mark it.

I started this doily in late April, finished the knitting in late November (with a break for angst-ing over how to rechart the hex mesh area in the outer rounds) and finally blocked it yesterday.  It's been a fun journey with a beautiful piece of lace to show for it at the other end.  I like the symmetry of the pattern, and I love the way that carefully stacked increases and decreases are used to warp and scallop various parts of the design.  As is common with a Niebling design, different stitch patterns and increase/decrease patterns are used to add textural contrasts.  I'm very glad that I tackled this project.  Not only is the result well worth the effort, I have confidence and faith that I can handle other large designs I've been interested in.  Will I do so immediately?  I don't know, nor do I know what doily I might end up doing next.  We'll see!

And now....  On to the next project!


Monday, December 15, 2025

Still no doily blocking

My doily weighs a bit more than 110g, which, given the estimate of 18g of thread per 250 yards, puts it between 1500 and 1600 yards.

I still haven't blocked it.  When I stretch it out for an estimate, it looks like it'll be at least 5' in diameter.  This is too big for the boxes I've been using.  So I got out my mats.  This took a while since they'd been in a semi-inaccessible location for a few years and I had to enlist assistance to retrieve them.  They're roughly 1 meter square so should work for a doily that's less than 2 meters in diameter.

Now I'm looking for an area where I can lay down 4 mats (2x2).  I used to live in such a place but that was then and things are different now.  I had hoped that I'd be able to do it in a room where I could close the door.  However, such a space does not seem to exist here.  Next I will try the main living area.  This means I'll need a way to keep the cats from helping, either before or during or after the blocking process.  No sharpening their claws.  No puking on anything.  No lying down on the doily and accidentally knocking out a bunch of pins.  Plus the room will be inaccessible for other uses while the doily is drying.

Dang.

It's possible I could use a room behind a closed door if I do some major furniture re-arranging.  But even then, quite possibly not.  The space is a few inches too narrow and I don't want to try and bend or break the mats.

It's also possible I can tape together some boxes in way that will keep them from bending when I pin out the doily.  I might try that because I'm deeply dubious about blocking in the main living area where cats can wander freely, even if I cover the blocking mats with a sheet or something while the doily is drying.

I don't want to fold it in half or quarters to block it.

We'll see.

This means that I need to think carefully before doing any future large doilies so that I have a good blocking strategy.

I also need to figure out where to store the mats since I'm not putting them back where they were.


Sunday, November 30, 2025

Lavori 07/30 progress report (knitting is finished!) plus a few other ramblings

I've been busy so not much has happened lately.

The biggest bit of progress was finishing the knitting of Lavori 07/30!!!!!  (yes, 5 exclamation marks, the sure sign of an insane mind)   It wasn't as quick as I had predicted in my last post.  I made a knitting error in a difficult-to-fix area, several rounds before I noticed its existence.  I took the knitting back, stitch by stitch, until I felt comfortable about trying to fix it.  The fix isn't perfect but it'll be pretty unnoticeable.  But after that, I cruised to the end, all several thousand stitches left to knit.  Several days later, I had a few hours available, and was able to do the crochet cast off.  (hopefully without dropping any stitches, which would be a very unhappy blocking surprise)

I've hidden some of the ends and am not sure how many more I'll bother with.  While knitting, I ended one ball and started the next by tying simple overhand knots.  They're relatively unobtrusive unless I go looking for them.  Heck, I had trouble finding my final end which was poking out on the cast-off round.  There's so much thread and so much else going on that any one little thing is not usually all that noticeable.  Hopefully that's also true of the areas where I imperfectly fixed knitting mistakes!  I fixed a lot of my knitting mistakes perfectly so those definitely won't be visible after blocking.

I'm not sure when I'll have the time to get it blocked.  I'll need a few hours and a fairly large space, and maybe more pins.

I have no idea how much thread I used -- my estimate is in the 1500-2000 yard range, give or take a bit, but I'll need to weigh it to get a better estimate.  I did manage to finish without needing to use any full balls of thread.  That means that I have 1050 yards (3 full balls of 350 yds each) of this Clarks Big Ball #30 crochet cotton (plus a few small partial balls) to use for a future doily.

On the whole, this was a very straightforward knit except for the inaccuracies in the chart.  I'll probably repeat this and bloviate a bit longer about it all when I do the final report after blocking.



Here's a photo, unblocked, showing that I have indeed done the cast-off.

Other than that, I, umm, still haven't done much.  I was fairly motivated to finish the doily and barely touched my sweater.  I still haven't completely decided how to handle the back vs the front, but I want to start knitting on it again so that may well start up again soon.  I won't bother to share a photo since it looks like a generic blob of knitting, nothing too interesting.

The travel shawl is slowly growing.  I made a mistake somewhere in the most recent increase (to over 300 stitches per row), but it was easy to kludge something without knowing exactly where the mistake is.  I was off by a stitch when I started the next set of eyelets, a very quick fix.  Dunno if I have too many or too few stitches -- I'll figure it out later.  Again, it does not matter at all in the grand scheme of things.



I've started to think about future projects but haven't really decided on anything yet.  I don't want to think too hard about doilies until this one is really and truly done.  I should start more projects -- maybe a hat or some socks, fingerless mitts or full mittens, something like that.  And the spinning wheel plus my fiber stash are whispering.  But it's also a busy time of year and I don't always have space for works in progress unless they are small and easily stored away when necessary.

And that's really about it for knitting (and other suitable blog topics) this month.


Sunday, November 16, 2025

The latest charity hat and a Lavori 07/30 progress report

Another charity hat is finished and ready to donate.  I'll have to look at the dwindling acrylic stash to see what color the next hat will be.  This one is a nice dark blue.


Lavori 07/30 doily progress -- I'm almost DONE!!!!!!  So exciting!  I have two more rounds of knitting to go (a pattern round and an intermediate round) and then it'll be time to do the crochet cast-off.  After that will come the challenge of finding a place (and the time) to block the doily, but I'll worry about that when I get there.

There are no further chart errors.  I'll give a full run-down of chart errors along with a re-post and re-discussion of my hex-mesh charting fix as part of the final report once everything is blocked and beautiful.

I have approximately 2400-2500 stitches left to knit.  That'll take a few hours, and the crochet cast-off will also take a few hours, and ditto for the blocking.  I believe there's enough thread in the current ball of thread to get me to the end, and if not, then I'll unravel the filet crochet project that I cut off the previous ball of thread, and use that to finish the crochet cast-off.  Dunno how long this will all take, but hopefully I'll be done before December, and if not, then before January.

It's been a big project for me -- nearly 7 months since I cast on, so far.  There was about a 4-6 week period where little knitting got done because I hadn't yet committed to any specific rechart of the problematic hex mesh area, but other than that, I've made slow but steady progress.

So.  That means I do have the stamina for large doily projects and no longer need to feel intimidated by the time commitment involved.  There's at least one >300-round doily (or tablecloth) I've been eyeing as well as many that are in the 150-250 round range.  Dunno what I'll do next.  I'm still very focused on finishing this doily now that I'm so close to the end.  I don't want to get too distracted.

There's not much else to report.  The Miami Vice shawl is growing.  The Appledore gansey is still sitting there, waiting for me to stop dithering about whether to do short-rows on the back or to contour the front neckline or both.  I also need to figure out many inches I'll need to knit to get to the shoulders.  Luckily, the intended recipient is around so I can take a few measurements and also try on the sweater when I get close.

I need more knitting projects, not counting the doilies.  Maybe another cabled hat?  Or toe-up socks with a self-patterning yarn?  Or another cat bed?

I haven't done much spinning lately, nor warped up a new rigid heddle weaving project.  There's a batch of Jacob/llama in my stash that's been tempting me lately.  I've already spun a different batch of Jacob/llama that I bought at the same time from the same person (but different sheep and llamas, probably, given that the roving color is different).  It made some very nice yarn.  I'm looking forward to seeing how this stuff spins compared to that.  But maybe I'll spin something else first.

And that's it for this post.


Friday, November 7, 2025

Lavori 07/30 progress report (converging back to the chart)

I've gotten through all of the re-charted hex mesh area and have re-converged with the Lavori 07/30 chart as written, yay!!!

It's also the point where the chart numbering jumps from 191 to 201 for no obvious reason.  Indeed, there is absolutely no obvious reason at all, so I guess this counts as another chart typo!

I have roughly 10 rounds of knitting left to go, almost certainly less than 20,000 stitches.  The rounds are steadily getting longer, of course.  They're currently hovering at around 1200 stitches per round.  Also, I'm done with the hex mesh area completely.  The only double yarnovers left are the ones between the outer fan segments.  The leaf garlands are on their final leaf.  And the outer fans are growing.

It's kind of fun to watch what happens to the leaf motifs as there are increases on one side and decreases on the other.  Yup, they start leaning rather quickly.  I hope it all blocks out the way it's supposed to.

There is a chart error/typo in round 201!  Well, two, actually, if you count the mislabeling of the chart (round 193 is instead labeled as 201, and that discrepancy will continue for the rest of the doily).  In Round 201:  There is a missing yarnover at the end of the pattern repeat.

Here's my handwritten chart of what I ended up doing in the problematic hex mesh area of the outer rounds.  You can see eraser marks from some of my previous charts.  It's not like there's only one way of handling the issue, after all!  Probably any of my charts would have worked, and even with this one, there are a couple of variations I could have done on particular rows.

Lavori 07/30 partial rechart variation


I started this chart at round 171, when the Lavori chart transitions to 12 pattern repeats per round.  Everything up through round 181 is the same as the published chart except that there is one extra hex mesh motif per round.  Everything after round 191 is the same as the published chart.  So my rechart mostly applies to rounds 183 through 191.

This only shows the hex mesh area, not the rest of the doily.  Also, for some rounds, the hex mesh area is partly at the beginning of the pattern repeat and partly at the end, and I didn't bother to indicate that since I could use my own judgment pretty easily.  There will be 1Mv moves (move the stuff at the end of the pattern repeat to the beginning) every now and then, which again, I didn't indicate, and ditto for the places where the pattern repeat begins and ends with a yarnover.

The rounds I've marked with stars are where leaf tips (which are double decreases) get incorporated into the hex mesh.

The little vertical lines below the center motif, below round 171, are to delineate the central motif so I could keep things relatively symmetric and lined up all the way up the chart.

I tended to do directional double decreases where it made sense, but didn't chart them out specifically.

Dunno if this'll help anyone, but I thought I'd share it anyway.  It might go into my final post on this doily where I also list all the chart errors and typos.

I've already started thinking about future doilies.

-----------------------------

I finished the charity hat I started a few weeks ago.  It's already been donated.  On to the next one!


The above pic shows it with the brim down.  The brim can be turned up to cover the ears, or the hat can be worn as a slouch hat.  Since it's all k1p1 ribbing, the brim can be turned up as much or as little as the recipient wants.

I'm still working on the Miami Vice shawl.  Tomorrow should offer some good travel-knitting opportunities.  I'll have the shawl with me and also supplies to start the next charity hat.  Plus other non-knitting things to do, though I'm pretty sure I won't bring a spinning project.

The sweater is still sitting as I dither over how I want to handle the neck opening (so that the back is higher than the front).

And that's it for me today!

Sunday, November 2, 2025

A bit of spinning and the first progress report of the month

I had written that the Navajo-Churro/Icelandic roving that I bought at Oregon Flock and Fiber Festival a few weeks ago was calling to me.

So I spun it.



It's not the world's softest yarn, but that's OK!  I had some trouble spinning it -- a bit of VM in the roving, areas that were clumpy vs areas that drafted smoothly, and so on.  But even though I was pessimistic after spinning the singles, plying took care of the irregularities.  It looks and feels fairly even.  I have about 200 yards of 2-ply from about 4 ounces of fiber.

Here's a pic of the roving blob.



The color is a nice medium to dark brown, with some of the fibers being a bit lighter or darker brown.

I'm not sure what I'll spin next.  But hopefully something soon.

Here's the roll-call progress report on other projects, complete with pics for a few of them:

Lavori 07/30 doily -- I have decided how to approach the next few rounds and am making slow progress.  I got sidetracked by other things so haven't worked on this for a few days.  It's exciting to be so close to done but daunting that these last rounds still have a few tens of thousands of stitches left to do.



Miami Vice travel shawl -- I've finished the first set of eyelets and am about to increase stitches again.  The variegation isn't doing anything annoying, yay.  I don't know how far I am in the pattern or how much yarn I've used, but that's OK.  I like this pattern/yarn combo enough to keep knitting.  I'm not sure what I'll do when I reach the end -- add a sideways knit edging?  It'll depend a bit on how much yarn is left and how tired I am of the project by then.  There are hundreds of yards of yarn between now and then.


Appledore gansey -- I've done the underarm gussets and am ready to split the front and back.  I'm dithering about whether to do a shaped neckline in the front, short rows in the back, or both.



Charity ribbed hat -- making progress whenever I need some mindless knitting.  I don't have a pic of this to share.  It's pretty basic, just a k1p1 ribbed hat in a dark green worsted-weight Red Heart acrylic yarn.

Hmm, I don't have enough projects going.

That's about it for the knitting/spinning progress!  I've been doing other things so it's not like I'm only sitting around and twiddling my thumbs.  But they are things that I don't tend to write about in this blog.


Tuesday, October 21, 2025

Continued doily dithering

Lavori 07/30 doily

OK, I've gotten as far as round 181 (really 182) on the Lavori 07/30 doily.  I've followed the chart but added the additional hex mesh motif in the middle of the hex mesh area.

Next round (183), another set of leaf tips joins the hex mesh motif.  I can do that round the same as the previous rounds, but I also have the opportunity to add yarnovers between the leaf tips and their neighboring leaves, similar to the way the chart had me do on round 173.

The decision I make will affect the next few rounds.

When I look closely at the photos in Lavori 7, it seems like this area has the maximum amount of binding and distortion.  So....  what should my approach be?

As charted (the incorrect way), round 183 has 8 stitches in the hex mesh area.  Round 185 and Round 187 have 8, round 189 has 6, round 191 has 2, and then leaf tips join again but it's all pretty straightforward from there.

One of the charts I drew (and have been following so far) does not add yarnovers.  Round 183 has 12 stitches in the hex mesh area (due to the extra hex mesh motif), round 185 has 10, round 187 has 6, round 189 has 4, and then round 191 has 2 and I've converged back on the same stitch count.

Given that the area will bind and distort when I block it, should I add more stitches so that rounds 187 and 189 have more stitches?  Or will it look stupid to have additional hex mesh motifs in that area, and also make it harder to converge back down to 2 stitches by round 191?   Round 193, which is labeled as 201, adds leaf tips again, which can complicate any approach that has more than 2 stitches for round 191, since I really do want to finish up the doily with the column of O-A-O (yo, sk2p, yo) between the outer fans (and leaves) for the final few rounds.

I will chart out a few possibilities now that I've reached this point and then decide what I want to do.

In other stream-of-consciousness ramblings, I made a knitting mistake in one of the pattern repeats, somewhere 2-4 rounds before round 181, in the area where leaves are growing from a stem.  Ugh.  Maybe I could fix it, but it's in a spot where there are lots of yarnovers, k-tbls, single decreases, and double decreases.  Chances are high that I'd make things a lot worse if I tried.  So...  I chickened out.  I left it alone and continued the pattern correctly on round 181, ignoring whatever was going on in round 179 or 177 or wherever it crept in.  Hopefully it won't be too obvious.  There will be a slight jog in the line of the stem in the one spot.  I don't know exactly what I did, but I think I did a twisted stitch instead of a double decrease and vice versa, low in the leaf where it's just separating from the stem and there are both stem stitches and leaf mid-rib stitches and the leaf's plain knit stitch(es) should surround the mid-rib but not the stem.

Sometimes I catch errors on the intermediate round, and sometimes I just tune out and knit without double-checking.  Most of the time, I can easily fix a problem even on the next pattern round because it's usually something pretty simple.  It gets trickier at places where there's a lot going on and it would be hard to build the section back up again if I drop the wrong yarnover or decrease at the wrong spot and various stitches run even further.  It's also complicated because this area is very scalloped due to the stacked increases and thus it's not always all that easy to follow the line of stitches from round to round.  I don't love this project so much that it needs to be perfect.  Heck, the design isn't perfect and we all know the chart isn't, either.

I am pretty excited to have only 20 pattern rounds left to go.  I think there are roughly 1100 stitches per round, give or take a bit, and it'll only keep increasing from here.  I'm glad I seem to have the stamina to do a 200+ round doily project these days.  Ten years ago I probably would have declined and chosen to do several smaller doilies instead.

I'm not sure what I'll do when this one is done.  Smaller doilies for a while?  And how small -- 50 rounds or 150 rounds?  Or do I want to choose another big one, where "big" is defined as over 150 rounds and probably over 200 rounds, or even over 300 rounds?  That's something to ponder as I eagerly plod my way through the next 20 rounds (and probably still close to 30,000 stitches).  The knitting is reasonably fun and I am genuinely happy about being close to done.  But it's still a lot of knitting.

Travel Shawl (Miami Vice shawl pattern)

I've finally knit all of the yarn that was reclaimed from the Daisies project and am now knitting fresh yarn from the yarn ball.  Yay!  So far there's no unhappy pooling, also yay!  I'm in the first band of the eyelet patterned part of the shawl.

More Travel Knitting (charity hat)

I needed a project that I could easily pick up and put down, no need to reach the end of a row or anything.  It's been a while since I knit a charity hat, so I started a new one.  It's in dark green acrylic (probably Red Heart) and is the usual k1p1 ribbed hat on 80 stitches.

Appledore Gansey

This is still coming along nicely.  I'm very close to the spot where I can start the underarm gussets.  I want to try it on the recipient to make sure it's not too big, too long, too short, etc., before I continue.  I'm nearing the end of my second skein of handspun, which means 325-ish yards once I reach the end.  The next skein I wound into a ball is about 125 yards.  Sweaters with fat yarn go faster and use less yardage than sweaters with thin yarn.  Not that this is necessarily good or bad.  There are trade-offs either way.  But I am definitely enjoying the speed at which the sweater is growing.

A Roving We Will Go (fiber fun)

I went to Oregon Flock and Fiber Festival with a friend.  We didn't have as much time there as we sometimes do.  So I think I missed some vendors I wanted to see.  Oh, well!  Also, we went on the last day so the selection was probably not quite as good as it was earlier.  There was still plenty available, of course!  And plenty of cute animals to admire, and sometimes even pet!

I was very restrained (probably too restrained) and only bought a few things.  My friend was also fairly restrained.

I got small batches (4 oz each) of a mostly-Romney roving in medium to dark gray, and a mixed Navajo-Churro/Icelandic roving in mid-brown.  I don't know if that's a cross-bred sheep or a blend, though I think it's a blend, and I don't know the percentages of each.  It  has lovely darker fibers (probably Icelandic outer coat) mixed in with the lighter.  The mostly-Romney is from cross-bred sheep.  The flock started out as Romney but over the years there were occasionally rams of other breeds introducing outside genetics.

I also got a slightly larger mixed Maker's Blend from a different vendor, of various colors of dark-autumn-toned wool with maybe a bit of alpaca.  It was packaged as a mini-bump, so I'm not sure if the colors are all kind of mixed together or if there will be some variegation as I spin it.

The Churro/Icelandic roving is whispering to me so I'll probably spin it up soon.  Chances are that I will do my usual default-spun 2-ply.  I'm not sure exactly what I'll do with the yarn since it's not going to be next to the skin soft.  A hat or a pair of mittens seems likely.  Or maybe I'll use it for weaving or something.

I also want to think about what to do with the Maker's Blend.  If it's variegated, then maybe I should do a chain ply (aka Navajo 3-ply).  Or keep it as singles and then ply it against something else, maybe.  Or keep it as singles, period, and use it that way.

Last year I got what I think was the same gray mostly-Romney roving from the same people.  It's already spun up into a lovely yarn.  It'll be interested to see how this year's roving compares.  That's part of why I stopped and bought stuff from these people once I saw their booth -- I knew I liked their roving from last year.

Here's a pic of the yarn I spun from last year's Romney-X roving.  I ended up with about 250 yards of 2-ply from the 4 ounces.  It was an enjoyable spin, very clean and easy to draft.


There are some other things in my fiber stash I'd like to spin soon. I've been eyeing them but haven't been able to decide what to spin first so nothing gets done.  Sigh.  I do want to have room in my stash for more lovely things by the time next year's fiber festivals start up.  Hopefully I'll settle down and spend time with my wheels as the weather continues its descent into winter.

It's probably about time for another post on spinning wheels...

I think that's all I wanted to ramble about today.


Tuesday, October 14, 2025

Sweaters, doilies, and shawls (progress reports, mostly)

This is mostly a progress report kind of post, which is very much what the current purpose of the blog is.

Lavori 07/30:  I decided to follow the chart as closely as possible, with one extra hex mesh motif in the middle of the hex mesh section.  This will take me through round 181 with no further adjustments.

There's a chart error/typo on round 173.  I think I wrote about it earlier.  But yes, given that I'm following the chart, more or less, there is a missing yarnover on the left side of the hex mesh motif.  There is a yarnover that will separate the leaf tips from the rest of the leaf motif.

There are also chart errors/typos on rounds 175, 177, and 179.  The second decreasing leaf motif, before the outer fans motif, have a yarnover inside the leaves.  They look like (skp, kX, yo, k2t) instead of (skp, kX, k2t), which is what they are supposed to be and what all the other decreasing leaf tips are.  X in this case is 7, then 5, then 3.  It's pretty obvious when you get there after you're over the first slight bit of confusion.  Round 179 has an additional chart error/typo, in the last of the increasing leaf motifs.  There's a missing yarnover -- it should be k2, yo, k-tbl, yo, k2, like all of the other increasing leaf motifs in the round.

I started another ball of thread near the beginning of round 175 (near the end of the second pattern repeat).  This one looks like it's close to a full ball, and the full ball was labeled as containing 500 yards.  Will it be enough to get me all the way to the end of the doily?  I suspect not, but I'm hopeful anyway.  The rounds already have roughly 1000 stitches per round and the number of stitches per round is going to keep increasing rapidly all the way to the end of the doily as the outer fan motifs develop.

I am confident that I will have enough thread to finish the doily, since after this final partial ball is finished, I still have 3 full balls (350 yards each) that I can use.  The remainder should be enough for another fairly large doily, or if not, then a few smaller doilies.

Travel project shawl:  I'm toodling along on the Miami Vice shawl.  It's not a half pi -- it's pretty much a full pi, though knit flat rather than in the round.  I've only done a few inches and already have over 200 stitches per row on the needle.  Oh, well.  I have 980 yards of yarn that will be knit one stitch at a time, whether the project increases stitches slowly or rapidly.  Hopefully I don't get any annoying stacking of the variegation in the stretches where the stitch count remains relatively constant.  I guess I'll find out!

Appledore Gansey -- still coming along nicely.

Hmm, I really could use another project.  Mittens or fingerless mitts?  A hat?  Socks?

And, because we're having lovely sweater weather, let me share a pic of a sweater I finished and then narble on about it for a few paragraphs.


Elizabeth Zimmermann Seamless Hybrid sweater (from handspun)




This is a sweater made from Elizabeth Zimmermann's Seamless Hybrid pattern.  It's one of the percentage-based recipes in her book Knitting Without Tears, though I used the version that is in the revised edition of Knitting Workshop.

It's called a hybrid because the upper area (above the armholes) starts out like a raglan and then transitions to a wide saddle shoulder.  There's also a back saddle, sort of like a yoke but not quite.

Hmm, I should probably take some better photos to show the details more clearly.

I knit mine from some handspun.  When I bought the roving bump, I was told it was "mostly merino".  I have no idea if that is true, but the sweater is definitely soft enough to wear next to the skin.  The yarn is a 2-ply in a dark maroon color with flecks of blue and purple.  The edges are garter stitch and the rest is stockinette.

There were a few things I had to rip and re-do since my initial calculations were a bit off.  No big deal.  There were a few spots that looked a bit odd until after blocking.  Again, no big deal, and I have enough knitting experience to not immediately assume the worst when things look weird before blocking.

On the whole, though, I'm very fond of this sweater and very pleased at how it turned out.  It's warm and comfortable and attractive.  I've already been wearing it this autumn.

I have several ounces of the yarn left, not that I have any good ideas what to do with it yet.  It might or might not be enough for a vest.  At one point, I was turning all my oddballs into socks, but I'm not sure I want to do that with a soft merino yarn.  So for now, I smile at it when I go stash-diving into the handspun stash.