Showing posts with label Zimmermann. Show all posts
Showing posts with label Zimmermann. Show all posts

Tuesday, October 14, 2025

Sweaters, doilies, and shawls (progress reports, mostly)

This is mostly a progress report kind of post, which is very much what the current purpose of the blog is.

Lavori 07/30:  I decided to follow the chart as closely as possible, with one extra hex mesh motif in the middle of the hex mesh section.  This will take me through round 181 with no further adjustments.

There's a chart error/typo on round 173.  I think I wrote about it earlier.  But yes, given that I'm following the chart, more or less, there is a missing yarnover on the left side of the hex mesh motif.  There is a yarnover that will separate the leaf tips from the rest of the leaf motif.

There are also chart errors/typos on rounds 175, 177, and 179.  The second decreasing leaf motif, before the outer fans motif, have a yarnover inside the leaves.  They look like (skp, kX, yo, k2t) instead of (skp, kX, k2t), which is what they are supposed to be and what all the other decreasing leaf tips are.  X in this case is 7, then 5, then 3.  It's pretty obvious when you get there after you're over the first slight bit of confusion.  Round 179 has an additional chart error/typo, in the last of the increasing leaf motifs.  There's a missing yarnover -- it should be k2, yo, k-tbl, yo, k2, like all of the other increasing leaf motifs in the round.

I started another ball of thread near the beginning of round 175 (near the end of the second pattern repeat).  This one looks like it's close to a full ball, and the full ball was labeled as containing 500 yards.  Will it be enough to get me all the way to the end of the doily?  I suspect not, but I'm hopeful anyway.  The rounds already have roughly 1000 stitches per round and the number of stitches per round is going to keep increasing rapidly all the way to the end of the doily as the outer fan motifs develop.

I am confident that I will have enough thread to finish the doily, since after this final partial ball is finished, I still have 3 full balls (350 yards each) that I can use.  The remainder should be enough for another fairly large doily, or if not, then a few smaller doilies.

Travel project shawl:  I'm toodling along on the Miami Vice shawl.  It's not a half pi -- it's pretty much a full pi, though knit flat rather than in the round.  I've only done a few inches and already have over 200 stitches per row on the needle.  Oh, well.  I have 980 yards of yarn that will be knit one stitch at a time, whether the project increases stitches slowly or rapidly.  Hopefully I don't get any annoying stacking of the variegation in the stretches where the stitch count remains relatively constant.  I guess I'll find out!

Appledore Gansey -- still coming along nicely.

Hmm, I really could use another project.  Mittens or fingerless mitts?  A hat?  Socks?

And, because we're having lovely sweater weather, let me share a pic of a sweater I finished and then narble on about it for a few paragraphs.


Elizabeth Zimmermann Seamless Hybrid sweater (from handspun)




This is a sweater made from Elizabeth Zimmermann's Seamless Hybrid pattern.  It's one of the percentage-based recipes in her book Knitting Without Tears, though I used the version that is in the revised edition of Knitting Workshop.

It's called a hybrid because the upper area (above the armholes) starts out like a raglan and then transitions to a wide saddle shoulder.  There's also a back saddle, sort of like a yoke but not quite.

Hmm, I should probably take some better photos to show the details more clearly.

I knit mine from some handspun.  When I bought the roving bump, I was told it was "mostly merino".  I have no idea if that is true, but the sweater is definitely soft enough to wear next to the skin.  The yarn is a 2-ply in a dark maroon color with flecks of blue and purple.  The edges are garter stitch and the rest is stockinette.

There were a few things I had to rip and re-do since my initial calculations were a bit off.  No big deal.  There were a few spots that looked a bit odd until after blocking.  Again, no big deal, and I have enough knitting experience to not immediately assume the worst when things look weird before blocking.

On the whole, though, I'm very fond of this sweater and very pleased at how it turned out.  It's warm and comfortable and attractive.  I've already been wearing it this autumn.

I have several ounces of the yarn left, not that I have any good ideas what to do with it yet.  It might or might not be enough for a vest.  At one point, I was turning all my oddballs into socks, but I'm not sure I want to do that with a soft merino yarn.  So for now, I smile at it when I go stash-diving into the handspun stash.


Thursday, September 18, 2014

Zimmermania!

I've been on an Elizabeth Zimmermann kick lately.  Well, always, really.  I like her approach to designing and knitting.

The latest is Cully's Epaulet Jacket from Knitting Workshop.  I used the pattern in the expanded edition, since my original edition is so old that it doesn't contain the pattern.  I used handspun at its own idiosyncratic gauge and re-figured the numbers to work for me.

I really like how it turned out.  Thick-and-thin, fuzzy, bulky black yarn totally works for this pattern.  The I-cord trim is very nice, too.  It is handspun as well, from some old Beast roving that I had dyed in shades of green many years ago.  The black yarn is from an Icelandic sheep.  I spindle-spun the yarn from roving (cloud batts, actually) that included both thog and thel.

This pattern is interesting in that it gives numbers for a bunch of different sizes, but doesn't seem to have the totally generic, customizable pattern directions that many of Zimmermann's other patterns seem to have.  No matter.  A trace of percentages and modularity is apparent in the pattern.  It was pretty easy to re-figure the necessary numbers.

The sweater seems like a top-down, garter-stitch variation of some of EZ's hybrid-ish, saddle-shoulder-ish, Brooks-ish sweaters.


Epaulet Jacket

The garment looks good on most people who have tried it on so far.

I would make another one right away except that there are many other sweater designs of hers I'd like to knit.  Someday I'll make another.  It was great fun to knit and I love how it looks and fits.

Another EZ sweater I've knit fairly recently is her Icelandic Overblouse from Knit One Knit All.  That one seems closely related to her Nalgar sweater.  It is knit in two pieces (one front and one back), in garter stitch, then seamed.

Since I knit this sweater is some pencil roving of a totally different gauge from the yarn the pattern actually calls for, re-calculating of the numbers was necessary.

I like how the sweater turned out.  It is lightweight but fairly warm, at least for situations where there is no wind, such as indoors.

Icelandic Overblouse

It is not as universally flattering as the Epaulet Jacket is.  Part of that might be the yarn choice, I suspect.  I'm glad I knit it, but at the moment I do not feel any need to knit it again.

The next EZ sweater I want to knit will probably also be from Knit One Knit All.  Unless, of course, it is not.

Over the years, I've made several percentage sweaters.  I've made the baby bog jacket, the tomten, the ribwarmer, the February baby sweater.  No baby surprise jackets yet, but no doubt some kind of surprise jacket is in my future.  I've made hats and mittens and socks and shawls and many other things.  A very small selection is shown in the photos below.

Vertical Brimmed Hat from Knit One Knit All


February Square Shawl (or baby blanket) from Knitter's Almanac


Horizontal Brimmed Hat from Knit One Knit All

Pi Shawl from Knitter's Almanac


One thing I haven't done yet, though, is steeks.  I'm not afraid of cutting my yarn.  I simply don't want to.

Elizabeth Zimmermann is one of the biggest influences on my knitting career.  Back when most knitting instruction was on the order of "follow my directions exactly and too bad for you if it doesn't work out", she explained theory well enough to free me to design my own things, at my own gauge, to fit any body shape or size that I desired.

The most recent project I started is yet another EZ design.  I'm doing a Pi Are Square shawl (from Knitting Around) from handspun.  A friend of mine was wearing one at a recent knitting group gathering.  I had not yet seen one in person, so had been dubious.  However, the shawl turns out to be quite attractive and very wearable.  It hangs nicely in the front without slipping off.  The back is long enough yet shorter than a triangle shawl, which means that there is no point to hang below my butt and get in the way of everything.  So I went home, rummaged through the stash, and cast on.  So far, so good.

I'll probably sneak in a few more projects while the shawl is going on.  Maybe another Maltese Fisherman's hat or another Horizontal Brimmed Hat.  Or some slippers.  Or another shawl, or a vest.  Or I can start the next sweater from another batch of handspun.  So many possibilities!  Thank you, Elizabeth Zimmermann.